Lights for Public Safety Diving

Dive-LightsWhen we think back over the years about dive equipment technology regarding some of the innovations and changes, the advances made with lighting technology are remarkable. From “housing” some lights decades ago to the current technology of LED and extremely small, powerful batteries, underwater lights are so improved.

So when we consider what kinds of lights are appropriate for PSD – especially given that the vast majority of dives are in conditions where no light could improve visibility – let’s put aside wide beam vs. narrow beam, rechargeable vs. standard battery, HID vs. LED, candlepower vs. lumens and consider a few factors that may not have been previously addressed.

One consideration is the decision to have hands-free operation or the traditional hand-held light. While some of the decision making process will depend on available budget, there are a number of options available from several manufacturers. In addition to the hand bracket, popularized by the cave diving community which allows a light head to be mounted on the back of the hand allowing use of the hand, there are also mounting options utilizing rail systems or mounting brackets that can be installed on full face masks or fully enclosed dive helmets. These light heads may be powered by separate battery containers connected by cord or may be a completely contained light including battery power. This option is available for hand brackets as well.

Another over-looked feature to consider is, “do we need a light that is safety rated or explosion proof?” While at first glance this may seem unimportant or irrelevant, consider this: often smaller hand-held lights that are used underwater are also used topside by tenders and other team personnel. Given that any call can potentially result in a scene with flammable material present, perhaps it should be a consideration to have smaller handheld underwater lights that are at a minimum Class 1 rated. For law enforcement PSD’s, Class 1 safety rating essentially means the light can be safely used in environments where flammable gases, vapors or liquids are present. Often these lights provide a narrow beam that is useful for not only cutting through smoke but also turbid water.

When purchasing underwater lights, it’s quite normal to be confused by some of the descriptions used as they relate to how powerful or bright the light is. Two terms used are “candlepower” and “lumens.” Both refer to candela which measures the power emitted by a light source in a given direction. Candlepower, once used extensively, is no longer used and is outdated and refers to the light emitted by a single candle of a specific size. Lumen is a more accurate method of light measurement that addresses exactly how much of the emitted light the eye can see. While it is easy to get caught up in the numbers, keep in mind the environment in which the light is used when considering brightness and bulb focus.

The options available to ERDI teams are many. However, after considering budgetary issues, selecting a light that fits the team’s needs, is durable and easy to maintain, provides needed brightness—and this is the most important part—doesn’t have bubbles coming out of it at depth, is really the criteria that should be considered.

Contact SDI TDI and ERDI

If you would like more information, please contact:

Tel: 888.778.9073 | 207.729.4201

6 replies
  1. Mark Windham, TDI/SDI #3475
    Mark Windham, TDI/SDI #3475 says:

    Good info from your u/w light articles. I hope that in future newsletters you will elaborate more. As both a tech and a psd instructor I have gone through many lights since 1972 and my Lobster Catcher eight D battery barbell light.
    Some topics that you might consider: bulk of powerful handhelds verses inconvenient canisters. (I used a DR canister for serveral years. But one time I forgot to turn it on at the surface; the only on/off was on the canister itself. So at 130ft I had to pull my doubles and stages over my head far enough to reach the switch. I wasted a lot of valuable dive time. So that became part of my pre-dive checklist. Well, you learn as you go.)
    I would like to see you discuss: the clarity of various bulbs in different water conditions, beam angle in different water conditions, more on battery types, and the levels of knock-around strength of both housings and bulbs.
    Thank you, and please keep on putting out your very informative material.

    • dpace
      dpace says:

      Thanks Mark
      Good ideas on future topics. And nice to hear about your 130ft lesson learned. We could probably write many informative articles on valuable lesson learned.

  2. Keith Cormican
    Keith Cormican says:

    Coming from technical and PSD I have seen the advantages of using the right light in what is called 0 viability. I teach the ERDI courses and introduce my students to using the right light expands our search patterns considerably. Just teaching a team on the IL River and they laughed at the idea. Put them in with my light and they are now a believer and looking at putting an order together.


Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>