
Many diving equipment manufacturers now sell regulators specifically designed for Nitrox service. These regulators can usually be identified by yellow and/or green rings on the first stage, and by yellow and/or green second stages. But the real difference is more than skin deep, and Nitrox regulators have special o-rings, Nitrox compatible seats, and use special lubricants. The real value of a dedicated Nitrox regulator is shown in situations where levels of oxygen higher than 40 percent will be used.

In addition to the markings that are used on regulators specifically designed for Nitrox service, you may also want to purchase a colored plastic hose wrap, designed to cover the low pressure hose connecting the first and second stages of your regulator. This is an additional method of identifying a regulator that will be used especially for Nitrox service.
Remember that if you purchase a regulator specifically for Nitrox you must not use it with any cylinders that have not been cleaned for oxygen service and filled at an oxygen safe facility. Use with anything but oxygen safe gas mixtures may expose the regulator to oils and contaminants that can lead to an oxygen fire or explosion. An oxygen fire could be fatal to you or anyone close by you.
Contact SDI TDI and ERDI
If you would like more information, please contact:
SDI
Tel: 888.778.9073 | 207.729.4201
Email: Worldhq@tdisdi.com
Web: https://www.tdisdi.com
Facebook: www.facebook.com/SDITDI
