Sidemount…It’s Not Just for Cavedivers Anymore!

Sidemount diving has been a staple of the cave diver’s toolkit for a generation, but these days, more and more non-cavers are wearing their bottles at their sides.


There are probably a handful of things happening in the dive industry that we could peg as the latest and greatest idea or innovation. I’d add developments in lighting technology, dive computers, and thermal protection to my list, but surely the hottest trend right now has to be sidemount diving (wearing a totally independent cylinder and regulator system slung on each side of the diver’s body).

Any technical diver old enough to remember “Friends” as a new television series may also remember when sidemount was a very specialized technique with a small and almost cliquish fellowship restricted to England’s Mendip Hills and North Florida’s Karst Country. Finding sidemount training and uncovering a mentor to help you progress in the technique was a lot like joining a mediaeval secret guild; you had to know someone, or have a solid recommendation from an existing initiate; and those outside the circle suspected witchcraft.

In the early days, gear was centered on mostly hand-sewn adaptations of the classic open water stab-jacket style BCD, a few welded bolt-snaps, and lots of bungee cord. The application was ALL about exploring small silt passages; what a good friend of mine describes as “a mighty tight squeeze.”

But that was then and this is now. Times and attitudes have changed. After all, back when NBC first aired “Friends,” the largest sport diving agency had branded TDI’s popular nitrox courses as too complex for the average diver while decompression diving was totally verboten. Now of course, nitrox is the usual choice for most divers regardless of which flavor C-Card they earned as an open-water diver. Most weekend charter rosters include at least a couple of divers planning staged deco; and often a full boatload of weekend warriors all planning for a deep, long dive.

These days, it seems that sidemount really has come out of the closet. To begin with, gone are the hand-wrought BCs. Mainstream manufacturers such as Dive Rite, Oxycheq, Armadillo, Hollis and OMS are producing beautifully crafted harness, butt-plate, wing combinations specifically for sidemount diving. Cam bands – used to convert regular tanks to sidemount tanks in an instant are in several manufacturer’s catalogs. And plenty of stores sell “regulator conversion kits” – an assortment of custom-sized hoses and 90-degree fittings designed to help make the transition from traditional backmounted doubles to sidemount a one-step process. Perhaps best of all, sidemount instruction is readily available and several agencies –SDI and TDI among them – offer specialty ratings and sidemount options for their existing curriculum. This is available to all skill levels in addition to the more traditional cavern and cave.

The real kicker perhaps is that sidemount divers are beginning to pop up on dive boats and at open-water sites, proving that the equipment isn’t just for cave divers anymore. On a brilliant Saturday morning at a popular quarry in Ohio this past summer, I noticed a handful of “tech divers” wearing sidemount kits. On local charter boats too, sidemount divers are starting to make a showing, especially among divers who are trained to execute wreck penetration.

Lamar Hires, head of Dive Rite and one of the early promoters of sidemount diving, files the reasons for using sidemount into two main categories – Lifestyle and Mission Specific. Let’s use Lamar’s definitions as a starting point to explore the overall features and benefits of SM diving.

The ubiquitous North Florida Cave Diver’s Rig consisting of a backplate, simple harness, wing and manifolded doubles, began to establish itself as the gold standard for technical divers sometime in the early 1990s. By the time TDI opened its doors in 1994, this kit configuration, with long hose on the right post, backup regulator and SPG on the left, and a generally minimalist approach to gear selection was what technical divers wore almost universally. But its one-size-fits-all approach and promotion as the universal solution to all dive applications has lost some of its luster over the years and technical divers have looked at other options with an open mind.

With a sidemount configuration, the tanks are carried independently of each other and can be attached to the diver in the water or close to the water. This makes pre- and post dive prep easier on the diver’s back and knees, since the stain of one tank is about half of the stain of two. A good buddy of mine swears that diving sidemount has helped her enjoy dive trips more and use aspirin less!

“There’s no way to describe how good it feels to take all my tanks off in the water, attach them to an equipment line and then walk up that boat ladder wearing nothing heavier than my harness and drysuit,” she says.

Also, the sidemount diver’s gas supply is fully redundant and carried in completely separate systems each with a first and second stage plus an spg (and usually a LP hose). This offers similar gas management options as a set of doubles (some argue more options than doubles) but the valves and first stages are within full sight at the diver’s side rather than behind her back. This obviously makes options during either simulated or real situation shutdowns very simple! There is never any guessing which first stage is giving the diver grief… real or otherwise. This alone has many SM divers-including myself- arguing that there is a safer option in the case of a free-flowing second stage, runaway wing inflator, runaway drysuit inflator or other gas leak

The final “lifestyle” benefit has to do with the ease sidemount diving when traveling. Number one: An SM harness doesn’t have a heavy backplate, keeping luggage within airline baggage allowance. Number two: renting “bottles” at one’s destination is easy! Standard scuba cylinders can be ready for service as sidemount primary tanks quickly, with minimum fuss, and very little extra gear. The addition of a couple of cam straps to the traveler’s luggage makes conversion of almost any sized scuba cylinder the work of a few minutes, making standard stage bottle kits very workable in a pinch.


Going back to the genesis of sidemount diving, we arrive at the original reason to move one’s primary cylinders from one’s back to one’s side: low ceilings and flat bedding planes. While this reality has informed the decision making of cave divers for more than a generation, more and more wreck divers feel that sidemount offers real advantages inside a wreck.

The interior of most wrecks, even those intentionally sunk and cleaned out ahead of time, present special challenges because of the likelihood of entanglement with overhead cables and other debris. A staple of the traditional Advanced Wreck class is a great session to take advantage of. The diver learns the best techniques to free oneself or a buddy from the clutches of a couple of metres of electrical wire and rotting wood typically found in various doubles. Not to say that entanglement in this sort of situation is a non-issue in sidemount, but the number of potential line-traps behind the diver’s head is significantly reduced when he is wearing sidemount kit.

I also find the inherent lateral stability against the effect of roll while wearing a sidemount setup is a huge benefit when scootering; but perhaps that’s a story for another day.

All this said, it is important to remember that no single kit configuration is right for ALL applications. Sidemount is not the silver bullet and is certainly not the best option always and everywhere. However, a growing number of tech and sport divers are finding SM an interesting and enjoyable way to dive in many different environments.

If you’re curious about Sidemount diving, find a workshop-it’s a great way to learn about the best ways to route hoses, hang lights, and configure deco bottles. Having a very flexible alternative to the traditional tech diver’s kit for many divers is worth the extra effort.

Take advantage of the NEW Sidemount program offered by SDI & TDI, visit /index.php?site=2&did=129 to get started today!

Photo Credit: Diverite


0 respostas

Deixe uma resposta

Want to join the discussion?
Feel free to contribute!

Deixe um comentário

O seu endereço de e-mail não será publicado. Campos obrigatórios são marcados com *