Άρθρα

How Logging Your Dives Can Make You a Better Diver

Here are a few items you can include in your logbook to help you stay organized and honest, track progress, and work on self-improvement as a diver.

Clipping: A Vital Skill for Fluid Diving

This article touches upon efficient ways to operate the ‘cursed’ clip and offers a few ideas on handling known as ‘Clip Management’.

6 Key Differences in Diving a Dry Suit vs a Wetsuit

We are often asked about the differences between diving wet and diving dry. Other than the obvious answer – “you don’t need to dry anything but your hair after the dive” – there are some key differences.

Survivor or Statistic… Which One are You?

Knowing that we are going to have some sort of equipment malfunctions, environmental/navigation emergencies, and will just simply make mistakes at some point in our technical diving careers, how do we avoid becoming a diving fatality statistic?

6 Skills Every Technical Diver Should Master

by Jon Kieren:

Technical diving is inherently dangerous. Diving in environments that restrict your access to the surface requires your foundational scuba diving skills to be second nature so when an emergency arises you can focus on solving the problem and aborting the dive. Whether you are just starting your TDI Intro to Tech Course, or have over 200 Advanced Trimix dives, these six essential skills should be practiced on every dive.

  1. Predive Check, Descent/Bubble Check, and S-Drill – While there are three skill sets listed here, we group them together because the overall objective is the same for all three: start the dive properly equipped and with fully functioning equipment.
    • Predive Check – Once fully dressed for the dive, as a team, each diver runs through their own equipment to verify primary cylinders are full and valves open with turn pressures verified, stage/deco cylinders are full with regulators pressurized but valves turned off, BCD inflates AND holds gas, dive computers/gauges are turned on and functioning properly, mask/fins/weights/etc. are donned and in good condition to dive.
    • Descent/Bubble Check – Depending on conditions and site, either on the surface or on the initial descent, the team inspects each other’s equipment looking for leaks and trapped or entangled equipment.
    • S-Drill – Each team member takes turns conducting the proper gas sharing procedure with another teammate.
    • The dive does not start until all of these checks have been conducted, any complication must be resolved before continuing the descent.
  2. Trim/Buoyancy/Finning – It’s not just for looks. The importance of being able to hold your position in the water column and prevent silting-out an environment cannot be overstated; and everyone can use a little practice. Every dive, try to spend some time focusing on different finning techniques and trim/buoyancy control. Grab the GoPro and let your buddies film you so you can get some valuable feedback on what you actually look like in the water as well.
  3. Valve Drills – On every single dive, you should practice shutting down and re-opening each valve. Make sure do to this with a teammate so they can verify each valve gets re-opened. Depending on your exposure protection and recent diving activity, you may find it more difficult to reach your valves than you remember. It is important to work on this flexibility and muscle memory on a regular basis, because when you really need it is not the time to realize that you cannot reach a valve.
  4. Remove and Replace Stage/Deco Cylinders and Bottle Swapping – It is important to occasionally practice removing and replacing stage/deco cylinders in order to maintain this muscle memory. Even if the dive does not require you to stage a cylinder, practicing this skill often will speed up and smooth out the process on the dives where it is required. Going over your bottom time because you were fumbling with a stage cylinder is both embarrassing and dangerous. You should also practice swapping bottles with teammates. This can be done while decompressing by swapping stages or lean deco gasses that you are finished with between your teammates. This increases team awareness, communication, and equipment familiarity. It is extremely important to check that no hoses or equipment have been trapped by the stage/deco bottle any time you replace one.
  5. Lift Bag/SMB Deployment and Reel Skills – Both deploying a lift bag/SMB and running a reel are skills that deteriorate quickly when not practiced regularly, and sloppy work in these skills can be extremely dangerous. Practice these skills as often as you can, if you don’t use it, you’ll lose it.
  6. Post Dive Briefing – It is extremely important to debrief every single technical dive. Discuss the highs and lows of the dive, where communication was good, where it was bad, and what areas can be improved upon for the next dive. You cannot see yourself in the water, so it is important everyone in the team provides some constructive criticism. This is often done with friendly banter, but it is important to remember that this feedback will help you improve your diving and safety.

While this is not intended to be an all-inclusive list of skills to be practiced for technical diving, these six skills are applicable to most technical diving scenarios, and can be easily practiced on just about every dive. What other skills do you like to practice regularly?

Why Divers Do Stupid Things

Why do divers do stupid things? Well the short answer is because they are stupid. Now I know that the majority of the readers of this article are going to be divers and it’s not usually a good idea to start off by insulting your audience but bear with me.

Deep Diving is an Experience, Not Just a Number

by Dr. Thomas W. Powell:

photo credit: Bill Mac

In the diving world, a unique few choose to push their personal limits. This may include diving deeper, penetrating wrecks, or even diving with advanced equipment. With that being said, one may view going deeper as setting a new depth record. While some divers want to set private or universal depth records, most divers choose to go deeper for the experience. They may be seeking to discover what exists at depth, or they may want to see a wreck that sits outside of recreational diving limits. The truth of the matter is, actual depth is often not the real objective. Instead, depth is a factor the diver must understand and recognize during planning. Divers who love this sport focus on the experience, not just a number.

Despite technical diving being a complex realm, any diver can enter into it. However, one must keep in mind, factors such as the equipment, training, planning, and even price tags are different. These changes are all part of the “deep experience.” To begin, one must look at the equipment. Deep or technical divers often need more gas, bottles with mixed gas, multiple regulators, items like manifolds and doubles bands, mixed gas computers, side-slung or side-mounted cylinders, and redundancies across the board. This need for gear leads each individual diver to search for what works best for them, in regards to the most desirable items and their configuration.

Second, a diver seeking to go deeper and have more technical experiences may(should) seek out advanced training. This training introduces mixed gases, extended range capabilities, equipment configurations, as well as oxygen-based physiology and how it relates to decompression. To accomplish this training, a diver will often research what facilities and instructors he or she can best learn from. (Find a TDI Facility/Instructor here) This again, is all part of the “deep-diving experience.” Dive professionals and dive shop owners must remember that the experience does not just take place underwater. If the dive professionals involved work to provide the best possible experience, the diver will remain happy, the business may recognize more profit, and that same diver may become a loyal customer.

Third, the planning changes for the deep/technical diver when compared to recreational diving. During training, technical divers learn that emergencies may involve hard or soft ceilings. For this reason, the diver must learn how to “bail out,” or safely return to the surface using gasses carried to depth. This need requires the diver and his partner or team to develop a bailout plan for specified depths throughout the dive. If an instructor teaches the diver to be competent and comfortable in this task, the diver is more likely to enjoy it, and look forward to planning deeper dives. Again, quality and competent training will build a better diver who seeks to actively use the knowledge he or she has gained

Fourth, the price tag associated with technical diving can grow in comparison to the prices seen in recreational diving. The experience provided by instructors, boat operators, shop owners, and even other divers will make the expenditures less painful. However, if the diver develops a passion for technical diving, then the cost is justified.

Finally, technical diving skills open up a whole new world for divers. The diver can go places and see things that other divers may not have the knowledge or capability to safely see. Hidden wrecks, deeper marine life, and unique underwater formations become available for technical divers. In certain cases and with proper training, technical divers may even be able to explore places that others have never ventured. “Deep” is a factor related to technical diving, but only part of the overall experience.

Technical divers maintain a certain pride factor within their personalities. They have taken a step that few others choose to take, and for this reason, they enjoy the adventure of deeper technical dives. They also enjoy using complex planning and specified gas mixes to get to these deeper depths. Rather than just enjoying the marine life, diving becomes a complex adventure that demands close attention to detail, extensive planning, and thorough training. If the journey is positive from start to finish, the diver will get the complete experience. This “experience” is what keeps divers wet and encourages them to move forward within the world of scuba.


– Dr. Thomas W. Powell, Owner/Instructor Trainer – Air Hogs Scuba, Garner, NC

Speeding up Decompression – Tips & Tricks

The reality is that an individual cannot reduce decompression stop times without altering a dive plan. To make decompression periods more enjoyable, a diver can find various activities to pass the time in an efficient and useful manner.

How to Switch your Diving Gas

How To: Label Your Nitrox Tank

Any time you fill a tank with nitrox, it must be identified as such. This will help to prevent accidents in the event that someone uses a tank filled with nitrox without taking the proper precautions.